Slide Gates Just Got a Whole Lot Simpler

Do you remember when the height of a slide door, height of the partition system, and location of the door all dictated how you ordered and installed your woven wire partition?  If you haven’t installed a woven wire partition before, then that question alone probably sounds overly complicated.  After all, a stocked partition product should have common, simplified hardware in order to truly be considered flexible in design.

BEHOLD: FordLogan slide gates have been simplified to use one method of attachment regardless of size or configuration.  No more plates to sandwich the mesh.  No more nylon spacers.  And possibly best of all, we’ve cut down on how much hardware you need to sort through to install your slide gate.

FordLogan slide gates now all ship with three line posts and a common L-bracket to mount the track brackets (for Installation Guide, click HERE).  While the line posts do add some additional material and weight to your order, we have also designed out the need for a channel header above the door opening to keep the price affordable.

And get this, you can now configure your system to lock at an end OR at a corner post.

Sound too good to be true?  Well, we prefer simple and we know you’ll appreciate it too.